Designing a microcontroller-based half-duplex interface device drove by the touch-tone signal
Main Article Content
Abstract
The interface device for communicating (IDC) as a bridge for the merger between two different systems based on different protocols and standards can be made of several electronic modules. The two Arduino boards (UNO R3 and MEGA2560 R3) have been constructed as the electronic modules of a gateway become a haft-duplex IDC, and are driven by the touch-tone signal. The research objectives, i.e., assembling some of the hardware for the embodiment of the adapter system, making a program structure, and performing a test of the IDC system. The haft-duplex IDC has been carried out by integrating all components by wiring to form an embedded system. Then, programming the microcontroller modules based on the Arduino software is carried outin six stages. Finally, the simulation test with the provision of conditions is carried out and obtained of six conditions for (i) the circuit of ring detection, (ii) the circuit of voice-operated transmit, (iii) the circuit off/on the hook of the telephone module, (iv) the circuit of tone decoder, (v) dial-up telephone numbers via push buttons and switching IC circuits, and (vi) the circuits of voice recording and storage in the form to playback. The test's success with six conditions has been an indication that the microcontroller-based IDC system is functioning as expected. Completing, the conclusion, and recommendationsrelated to measurement on the various purposes and the real conditions for the half-duplex interface adapter can be implemented.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
References
[2] R.S.E-T. Salim, and A.B.A. Mustafa. (2021, Jul-Aug). Mobile Satellite Services and VSAT Technology: A Comparative Study. IOSR Journal of Electronics and Communication Engineering (IOSR-JECE). [Online]. 16(4), 1-6. Available: http://www.iosrjournals.org/iosr-jece/papers/Vol.%2016%20Issue%204/Ser-1/A1604010106.pdf
[3] Abiad, M., Kadry, S., & Ionescu, S. (2018). Cost efficiency of Telecommunication Equipment: A Review. 2018 4th International Conference on Applied and Theoretical Computing and Communication Technology (iCATccT). Mangalore, Karnataka 574225, India 2018, September 6-8. doi:10.1109/icatcct44854.2018.900
[4] ITU. (2020, May 11). The Radio Regulations, Edition of 2020. ITU Publication Notice, 2020.
[5] D. Hindocha, A.K. Bagga, N. Atmande, and D.V. Rojatkar. (2015, March). Next Generation Network: An Overview A Future Telecom Network. International Journal of Engineering Research & Technology (IJERT). [Online]. 4(3), 675-680. Available: https://www.ijert.org/research/next-generation-network-an-overview-IJERTV4IS030913.pdf
[6] A.C. Eska. (2020, Feb.). The Communication System of Building from Outdoor to Indoor with AMC at 10 GHz. INFOTEL. [Online]. (12)1, pp. 13-17. Available: https://ejournal.st3telkom.ac.id/index.php/infotel/article/view/465/278
[7] A.C. Eska. (2020, Nov.). Doppler Shift Effect at The Communication Systems with 10 GHz around Building. INFOTEL. [Online]. (12)4, pp. 129-133. Available: https://ejournal.st3telkom.ac.id/index.php/infotel/article/view/483/304
[8] K. Sverian, J. Haule, and M. Kisangiri. (2013, Nov.). Review of Radio Propagation Properties and Applications in Different Frequency Bands. International Journal of Engineering Research & Technology (IJERT). [Online]. 2(11), pp. 307-312. Available: https://www.ijert.org/research/review-of-radio-propagation-properties-and-applications-in-different-frequency-bands-IJERTV2IS110054.pdf
[9] M.O. Sultonova. (2016). Development of wireless telecommunication systems with the use of technologies of cognitive radio. The 2016 International Conference on Information Science and Communications Technologies (ICISCT). Kuala Lumpur, 2016. doi:10.1109/icisct.2016.7777394
[10] S. Nazir, G. Fairhurst, and F. Verdicchio. (2016). WiSE - a satellite-based system for remote monitoring. International Journal of Satellite Communications and Networking. [Online]. 35(3), 201–214. doi:10.1002/sat.1176
[11] T. Page. (2014). Touchscreen Mobile Devices and Older Adults: A Usability Study, International Journal of Human Factors and Ergonomics. [Online]. 3(1), pp. 65-85. Available: http://dx.doi.org/10.1504/IJHFE.2014.062550
[12] Krzysztof Kędzior. (2018, April). Introduction to human factors and ergonomics, International Journal of Occupational Safety and Ergonomics. [Online]. 24(1), 1. Available: DOI: 10.1080/10803548.2018.1463724
[13] L. Schenker. (2013, July). “Pushbutton Calling with a Two-group Voice-frequency Code,” The Bell System Technical Journal. [Online]. 39(1), pp. 235–255. https://doi.org/10.1002%2Fj.1538-7305.1960.tb03929.x
[14] G. Shreta, K. Subhasree, G. Soumen, G. Tanumay, and G. Suvojit. (2015, October). Dual Tone Multiple Frequency Based Home Automation System. International Journal of Engineering Research (IJER). [Online]. 4(10), pp. 542-544. Available: https://www.indianjournals.com/ijor.aspx?target=ijor:ijer&volume=4&issue=10&article=006
[15] R. Brama, P. Tundo, A.D. Ducata, and A. Malvasi. (2014). An inter-device communication protocol for modular smart-objects. 2014 IEEE World Forum on Internet of Things (WF-IoT). Seoul, Korea, 6-8 March 2014. doi:10.1109/wf-iot.2014.6803203.
[16] A. McKenzie. (2011). INWG and the Conception of the Internet: An Eyewitness Account. IEEE Annals of the History of Computing. [Online]. 3(1), 66–71. Available: doi:10.1109/mahc.2011.9.
[17] M. Maemunah, and M. Riasetiawan. (2018). The Architecture of Device Communication in Internet of Things Using Inter-Integrated Circuit and Serial Peripheral Interface Method. 2018 4th International Conference on Science and Technology (ICST). Yogyakarta, 2018, October 18-19. doi:10.1109/icstc.2018.8528663
[18] B. Massimo, and M. Shiloh, “The Arduino Paltform,” Getting Started with Arduino, 3rd edition. Sebastopol, CA: Maker Media, 2015, pp. 15-22.
[19] A. Goeritno, J. Irawan, and Sopyandi. (2018, July). Segmentation of Load Groups on a Single Phase kWH-meter Using the Payload Data Handling System. International Journal of Advanced Research. [Online]. 6(7), pp. 415-426. Available: http://dx.doi.org/10.21474/IJAR01/7378
[20] A. Goeritno, and M.Y. Afandi. (2019, Aug.). Designing a Security System Based-on Microcontroller Integrated into the Immobilizer System. International Journal of Electronics and Communication Engineering. [Online]. 6(8), pp. 1-11. Available: http://www.internationaljournalssrg.org/IJECE/2019/Volume6-Issue8/IJECE-V6I8P101.pdf
[21] M. Scarpino, “Introducing EAGLE,” Designing Circuit Boards with EAGLE: Make High-Quality PCBs at Low Cost. New York City, NY: Pearson Education, 2014, pp. 1-5.